25 Ft TelescopingFlagpole — Made in USA

A 25 ft flagpole pairs best with a 4×6 ft or 5×8 ft American flag. 4×6 ft is the most common residential choice; 5×8 ft is recommended for larger lots and maximum visibility from the street.

Yes. Our 25 ft Titan telescoping flagpole is extruded, anodized, and assembled in the United States, and the multi-year warranty is honored by a US-based manufacturer.

Yes — 25 ft is the most popular height for two-story homes and standard suburban lots. The pole stands tall enough that the flag clears the roofline and reads correctly from the street.

A USA-made 25 ft telescoping flagpole is rated up to 95 mph (no flag). In coastal or open-plains exposure, the bigger advantage is that you can retract a telescoping pole in under a minute before a named storm.

A typical 25 ft residential install uses a footing roughly 24–36 inches deep and 12–16 inches wide, with a PVC ground sleeve set plumb in concrete. Confirm the exact depth on the spec sheet for your pole and check local frost-line requirements.

The pole itself installs in about 45 minutes solo once the concrete footing is cured. You drop the pole into the PVC ground sleeve, extend the 5 sections, and lock the collars — no contractor needed.

Yes. A 25 ft pole easily accommodates a 4×6 ft American flag on top with a smaller 3×5 ft state, military, or seasonal flag below using the included swivel rings.