Residential, Commercial & Telescopic Flag Poles for Sale
Every flag pole we sell is manufactured in the United States from heavy-wall 6063-T6 aluminum and wind-rated by the manufacturer — most models 86–142 mph unflagged (residential) and higher for commercial, with lower ratings when the recommended flag is flying.
Not sure which pole? Start here
About this collection — specs, sizing, and buying guidance

21 ft EZ Pole Telescoping Flagpole Kit — American Made Aluminum
Fly Old Glory tall and proud with the EZ Pole 21 ft Telescoping Flagpole from America First Flagpoles. This American-made telescopic flag pole ships in four sections for easy assembly, adjusts in height from 9'6" up to 21 ft, and includes a 360° "no wrap" swivel system so your flag never tangles around the pole. What's Included 21 ft anodized aluminum telescoping flagpole (4 sections) Gold anodized aluminum 3" ball topper ABS ground sleeve and installation hardware Two 360° no-wrap swivel rings (fly two flags) Optional 3' x 5' nylon US flag (select the "With Flag" variant) Key Features Twist-lock height adjustment — extend from 9'6" up to the full 21 ft No-wrap swivel system — flag spins freely so it never wraps the pole Anodized aluminum — rust-proof, no painting or sanding Fly two flags — US flag on top with a state, military, or seasonal flag below Made in the USA by American workers How a Telescoping Flagpole Works Each section of the pole nests inside the next when collapsed and locks in place with a quarter-turn when extended. To raise the flag you extend each section from the bottom up; to lower for storms, storage, or half staff you simply twist and collapse. No ropes, no pulleys, no halyard tangles. Installation Installing this 21 ft telescoping flagpole takes most homeowners under an hour. Dig a hole roughly 24" deep, set the included ABS ground sleeve in concrete, let it cure 24–48 hours, then slide the pole into the sleeve. Full step-by-step instructions are included in the box. Specifications Height: 21 ft (adjustable down to 9'6") Material: anodized aluminum Sections: 4 Finish: Silver anodized Recommended flag size: 3' x 5' or 4' x 6' Origin: Made in the USA Frequently Asked Questions How tall is a 21 ft telescoping flagpole when collapsed? Roughly 6 feet — easy to ship, store, and lower before storms. Can I fly two flags on this pole? Yes. The included swivel rings let you fly the US flag on top with a second flag below, both rotating 360°. How do I put a telescoping flagpole at half staff? Collapse the top section, raise the flag to the top of the next section, and lock in place. The flag will fly at roughly half the pole's full height. What flag size works best on a 21 ft pole? A 3' x 5' nylon flag is standard; a 4' x 6' looks more proportional from the street. Is it made in the USA? Yes. Manufactured in America from US-sourced aluminum.

15 ft Titan Telescoping Flagpole Kit
The 15 ft Titan Telescoping Flagpole Kit is the easiest way to fly Old Glory at your home — a complete American-made telescopic flag pole that arrives preassembled, extends in under a minute, and comes with everything you need to start flying the same day. Choose Silver, Light Bronze, or Dark Bronze/Black to match your home. What's in the Kit 15 ft Titan telescoping flagpole (6105-T5 anodized aluminum, preassembled) 2.5” Diameter Base, 14 Gauge Thickness Premium 3' x 5' nylon US flag with sewn stars and stitched stripes 3" gold ball topper ABS plastic ground sleeve Hardware to fly two flags (US flag plus state, military, or seasonal flag) Printed installation instructions Key Features Patented interlocking sleeve — locks each section rock-solid, extends and retracts smoothly 360° swivel ring clips — flags rotate freely so they never wrap the pole Zero maintenance — anodized finish won't rust, chip, peel, or fade Arrives preassembled — no complex setup, just extend and fly Made in the USA with a limited lifetime warranty Is a 15 ft Telescoping Flagpole the Right Height? 15 ft is the perfect entry-size flagpole for smaller front yards, townhomes, patios, and condos. It's tall enough to fly a 3' x 5' US flag with proper proportion, but short enough to install without HOA height concerns in most neighborhoods. If you want more presence from the street, step up to the 20 ft Titan or 25 ft Titan. Installation Installation takes most homeowners under an hour. Dig a hole roughly 18–24" deep, set the included ABS ground sleeve in concrete, let it cure 24–48 hours, then slide the preassembled pole into the sleeve. Twist each section up from the bottom and lock — your flag flies in seconds. Specifications Height: 15 ft Material: 2.5”, 14 Gauge 6105-T5 anodized aluminum Finishes: Silver, Light Bronze, Dark Bronze/Black Recommended flag size: 3' x 5' Warranty: Limited lifetime Origin: Made in the USA Frequently Asked Questions How long does a 15 ft Titan telescoping flagpole take to install? Most homeowners finish the ground sleeve in 30–60 minutes; the pole itself extends in under a minute. Can I lower the flag during a storm? Yes. Twist each section and collapse the pole down to its compact ~5 ft transport length in seconds. How do I put a telescoping flagpole at half staff? Collapse the top section and re-lock — the flag will fly at roughly half the pole's full height. What flag size works best on a 15 ft pole? A 3' x 5' nylon flag (included) is the correct proportion for a 15 ft pole. Is the Titan flagpole made in the USA? Yes. The Titan is American-made and backed by a limited lifetime warranty.

20 ft - 3 in Titan Telescoping Flagpole Kit
The 20 ft - 3 in. Titan Telescoping Flagpole Kit is our most popular residential telescopic flag pole — tall enough to command attention from the street, easy enough for one person to install in an afternoon. Choose Silver, Light Bronze, or Dark Bronze/Black. Includes a 4' x 6' nylon US flag. What's in the Kit 20 ft Titan telescoping flagpole (6105-T5 anodized aluminum, preassembled) 3” Base, 12 Gauge Thickness Premium 4' x 6' nylon US flag with sewn stars and stitched stripes 3" gold ball topper ABS plastic ground sleeve Hardware to fly two flags Printed installation instructions Key Features Patented interlocking sleeve — sections lock rock-solid; smooth extension and retraction 360° swivel ring clips — flag rotates freely and never wraps the pole Zero maintenance — anodized finish won't rust, chip, peel, or fade Arrives preassembled — extend and fly Made in the USA with a limited lifetime warranty Specifications Height: 20 ft Material: 3", 12 Gauge 6105-T5 anodized aluminum Finishes: Silver, Light Bronze, Dark Bronze/Black Recommended flag size: 4' x 6' (included) Warranty: Limited lifetime Origin: Made in the USA Installation Set the included ABS ground sleeve in a 24"-deep concrete footing, let it cure 24–48 hours, then drop in the preassembled pole and twist each section up to lock. Most homeowners finish in one afternoon with no special tools. See our foundation depth guide for full step-by-step instructions. FAQ What flag size should I fly? A 4' x 6' US flag (included) is the recommended size for a 20 ft pole. How do I put it at half staff? Collapse the top section and re-lock; the flag flies at roughly half the pole's full height. Can I lower it during a storm? Yes — twist each section and collapse the pole down to its ~5–6 ft transport length in under a minute.

25 ft Titan Telescoping Flagpole Kit
The 25 ft Titan Telescoping Flagpole Kit is our tallest residential telescopic flag pole — built for large yards, corner lots, and homeowners who want Old Glory visible from blocks away. American-made, preassembled, and backed by a limited lifetime warranty. Choose Silver, Light Bronze, or Dark Bronze/Black. Please note: Due to the larger size of the 25’ flagpole, the ball ornament may ship separately. What's in the Kit 25 ft Titan telescoping flagpole (6105-T5 anodized aluminum, preassembled) 3” Base, 12 Gauge Premium 4' x 6' nylon US flag with sewn stars and stitched stripes 3" gold ball topper ABS plastic ground sleeve Hardware to fly two flags Printed installation instructions Key Features Patented interlocking sleeve — sections lock rock-solid; smooth extension and retraction 360° swivel ring clips — flag rotates freely and never wraps the pole Zero maintenance — anodized finish won't rust, chip, peel, or fade Arrives preassembled — extend and fly Made in the USA with a limited lifetime warranty Specifications Height: 25 ft Material: 3”, 12 Gauge 6105-T5 anodized aluminum Finishes: Silver, Light Bronze, Dark Bronze/Black Recommended flag size: 4' x 6' (included) or 5' x 8' Warranty: Limited lifetime Origin: Made in the USA Installation Set the included ABS ground sleeve in a 24–30" deep concrete footing, let it cure 24–48 hours, then drop in the preassembled pole and twist each section up to lock. A second person makes the upper sections easier to guide. See our foundation depth guide for step-by-step instructions. FAQ Is a 25 ft flagpole too tall for a residential yard? It's the right size for large lots, acreage, and corner properties. For standard suburban yards, the 20 ft Titan is usually a better fit. Check your HOA's height rules first. What flag size should I fly? A 4' x 6' US flag (included) is standard; a 5' x 8' flies more impressively if you want maximum visibility. Can I lower it during a storm? Yes — twist each section and collapse the pole down to its compact transport length in under a minute.

20 ft Residential Aluminum Flagpole Kit – Easy Install, Made in USA
One-piece 20 ft residential flagpole, Made in the USA from heavy-wall 6063-T6 aluminum with a 3" butt tapering to 2" at the top. Wind-rated to 114 MPH without flag, this is the right size and strength for most single-story and ranch-style homes. Complete kit ships with a 4" gold or silver ball, stationary truck and pulley, nylon halyard, quiet vinyl-covered bronze snaps, 9" cast cleat, and PVC ground sleeve — just add concrete and a flag. Choose from Satin, Clear Anodized, Bronze Anodized, or Black Anodized finishes.

25 ft 3-inch Residential Aluminum Flagpole Kit – Outdoor Flagpole
One-piece 25 ft residential flagpole with a 3" butt tapering to 2" at the top, made in the USA from 6063-T6 aluminum. Wind-rated to 86 MPH without flag, it's the proportionally correct choice for most two-story homes that want a classic neighborhood-anchor look. Complete kit ships with a 4" gold or silver ball, stationary truck and pulley, 1/4" nylon halyard, vinyl-covered swivel snaps, 9" cleat, and PVC ground sleeve. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

20 ft. 4 inch In-Ground Aluminum Flagpole – Complete Home Flagpole Set
One-piece 20 ft residential flagpole with a heavy 4" butt tapering to 2" at the top, made in the USA from 6063-T6 aluminum. Wind-rated to 142 MPH without flag, the 4" butt gives a noticeably stiffer, more commercial feel than the standard 3" pole. Complete kit ships with a gold or silver ball, stationary truck and pulley, 5/16" nylon halyard, vinyl-covered swivel snaps, 9" cleat, and PVC ground sleeve. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

25 ft - 4-inch Heavy Duty Aluminum Flagpole for Homes – Weather Resistant
One-piece 25 ft residential flagpole with a 4" butt tapering to 2" at the top, made in the USA from 6063-T6 aluminum. Wind-rated to 110 MPH without flag — a great choice for two-story homes that want a more substantial, commercial-grade presence than a standard 3" pole. Complete kit ships with a gold or silver ball, stationary truck and pulley, 5/16" nylon halyard, vinyl-covered swivel snaps, 9" cleat, and PVC ground sleeve. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

30' Residential Aluminum Flagpole Kit – Premium Outdoor Flagpole for Home
One-piece 30 ft residential flagpole — our tallest home pole — with a 4" butt tapering to 2" at the top, made in the USA from 6063-T6 aluminum. Wind-rated to 89 MPH without flag, it delivers a true commercial-grade presence on larger lots, estates, and acreage properties. Complete kit ships with a gold or silver ball, stationary truck and pulley, 5/16" nylon halyard, vinyl-covered swivel snaps, 9" cleat, and PVC ground sleeve. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Maximum recommended flag size: 5’x8’. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

25' Economy Commercial Flagpole Aluminum
25 ft commercial-grade flagpole with a 5" butt and 0.125" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 137 MPH without flag, it's a value-priced 25-footer for small businesses, churches, and HOAs that want true commercial construction without paying for premium wall thickness. Complete kit ships with a ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

25' Standard Aluminum Commercial Flagpole
25 ft commercial-grade flagpole with a 5" butt and 0.156" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 175 MPH without flag, it's the workhorse 25-footer for offices, schools, dealerships, and municipal buildings where a 5' x 8' flag belongs. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

30' Economy Aluminum Commercial Flagpole
30 ft commercial-grade flagpole with a 5" butt and 0.125" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 100 MPH without flag, it's our value-priced 30-footer for inland sites where extra height matters more than maxed-out wind capacity. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

25' Heavy Duty Aluminum Commercial Outdoor Flagpole
25 ft heavy-duty commercial flagpole with a 5" butt and 0.188" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 232 MPH without flag, it's our highest-spec 25-footer — built for coastal exposure, high-wind zones, and sites that need maximum strength without going up in pole diameter. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

30' Standard Aluminum Commercial Flagpole
30 ft commercial-grade flagpole with a 5" butt and 0.156" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 114 MPH without flag, it's our standard-duty 30-footer for businesses, schools, and HOAs that want extra wall thickness over the Economy spec. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

30' Heavy Duty Aluminum Commercial Flagpole High Wind Rated Flagpole
30 ft heavy-duty commercial flagpole with a 6" butt and 0.188" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 200 MPH without flag, it steps up to a 6" shaft for serious wind capacity — ideal for dealerships, coastal sites, and high-exposure campuses flying a 5' x 8' or 6' x 10' flag. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 5' x 8'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

35' Economy Aluminum Commercial Flagpole
35 ft commercial-grade flagpole with a 6" butt and 0.156" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 116 MPH without flag, it's the budget-friendly way to add real visual height for businesses, schools, and HOAs that want a 6' x 10' flag aloft. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 6' x 10'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

35' Standard Aluminum Commercial Flagpole
35 ft commercial-grade flagpole with a 7" butt and 0.156" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 166 MPH without flag, it's our standard-spec 35-footer — the right balance of height, strength, and budget for corporate campuses, schools, and civic buildings. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 6' x 10'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

35' Premium Heavy-Duty Aluminum Commercial Flagpole
35 ft premium heavy-duty commercial flagpole with a 7" butt and 0.188" wall, made in the USA from 6063-T6 aluminum. Wind-rated to 189 MPH without flag, it's the high-end pick for dealerships, coastal exposure, and signature corporate entrances that need maximum strength at full visual height. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 6' x 10'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes. Please Note: Anodized flagpoles may be 2 piece shafts preassembled.

40' Economy Aluminum Commercial Flagpole
40 ft commercial flagpole with a 7" butt and 0.156" wall, made in the USA from 6063-T6 aluminum and shipped as a two-piece shaft for cost-effective freight. Wind-rated to 122 MPH without flag, it's the budget-friendly path to 40 feet of presence for corporate campuses, schools, and large civic sites. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 8' x 12'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

40' Standard Aluminum Commercial Flagpole
40 ft commercial flagpole with an 8" butt and 0.156" wall, made in the USA from 6063-T6 aluminum and shipped as a two-piece shaft. Wind-rated to 162 MPH without flag, it steps up to a full 8" base for serious presence and wind capacity at corporate HQs, schools, and municipal sites. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 8' x 12'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

40' Heavy Duty Aluminum Commercial Flagpole
40 ft heavy-duty commercial flagpole with an 8" butt and 0.188" wall, made in the USA from 6063-T6 aluminum and shipped as a two-piece shaft. Wind-rated to 184 MPH without flag, it's the high-wind 40-footer for coastal sites, dealerships, and signature campus entrances that demand maximum strength. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 8' x 12'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

45' Standard Aluminum Commercial Flagpole
45 ft commercial flagpole with an 8" butt and 0.188" wall, made in the USA from 6063-T6 aluminum and shipped as a two-piece shaft. Wind-rated to 148 MPH without flag, it splits the difference between our 40 and 50-footers — extra height for car dealerships, civic plazas, and large campuses without stepping up to a 3-piece pole. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 8' x 12'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.

50' Standard Aluminum Commercial Flagpole
50 ft commercial flagpole with an 8" butt and 0.188" wall, made in the USA from 6063-T6 aluminum and shipped as a three-piece shaft for freight-friendly delivery. Wind-rated to 115 MPH without flag, it's the standard 50-footer for car dealerships, civic plazas, large schools, and corporate headquarters that want a 10' x 15' flag flying overhead. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 10' x 15'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.
American-Made Flag Poles for Every Property
Whether you need residential flagpoles for your front yard, commercial flagpoles for a business or school, or telescopic flagpoles that retract for storms, our full lineup of American-made aluminum flag poles has you covered. Every pole is manufactured in the USA from heavy-wall 6063-T6 aluminum tubing and engineered to withstand sustained winds of 95 mph or higher. One-piece in-ground flag poles run from 20 to 80 feet and set into a PVC or steel ground sleeve poured in concrete — the traditional install with a smooth taper and external halyard; the pole sets into the sleeve and can be lifted back out if needed. Telescopic flag poles come in 15, 20, and 25 ft, use nested locking sections instead of a rope, and can be collapsed in about a minute before a storm. Complete kits bundle the pole, sleeve, ornament, and hardware in one shipment. Pricing generally tracks height and butt diameter: residential 20–30 ft poles run in the low four figures, commercial 25–50 ft poles run from the high hundreds into the low thousands, and 60–80 ft poles are made-to-order with engineered foundations. Telescoping flagpoles, flags, and accessories ship free inside the lower 48; one-piece residential and commercial poles ship by motor freight at a delivered price based on your ZIP code, shown on the product page before checkout. Pair any pole with a USA-made nylon or 2-ply polyester flag sized to the height, and check the Buying Guide if you are still deciding on height, finish, or foundation.
Frequently Asked Questions
What size flag pole should I buy?
Match the pole to the building. A 20 ft flag pole suits most single-story homes, 25 ft fits two-story homes and deeper lots, and 30 ft works for estates and hilltops. Small businesses typically start at 25–30 ft, schools and mid-size commercial buildings at 35–40 ft, and civic or campus sites at 50 ft and above.
How much does a flag pole cost?
Residential one-piece aluminum flag poles run roughly $1,199–$1,499 depending on height, butt diameter, and finish. Telescopic kits sit in the mid hundreds. Commercial poles run from the high hundreds into the low thousands, and 60–80 ft poles are quoted individually. Standard shipping is free to the lower 48.
What is the difference between a one-piece and a telescopic flag pole?
A one-piece flag pole is a single tapered aluminum shaft that sets into a ground sleeve poured in concrete (the pole can be lifted out of the sleeve if needed) and raised or lowered with a rope halyard. A telescopic flag pole uses nested sections that slide up and lock, with swivel rings instead of a rope, and it can be collapsed for storms or storage. One-piece looks traditional and flies larger flags; telescopic is faster to install and easier to operate.
Are your flag poles made in the USA?
Yes. Every flag pole we sell is manufactured in the United States from American-milled 6063-T6 aluminum — verified at the manufacturer level, not simply assembled here.
Do flag poles ship free?
Yes, standard shipping is free to the lower 48. In-ground poles move by motor freight and typically take 2–4 weeks; freight deliveries require a physical street address, not a PO box. Telescopic poles ship ground and usually arrive faster.
What flag size goes with each pole height?
A good rule is a flag roughly one quarter to one third of the pole height: 3x5 or 4x6 ft on a 20 ft pole, 5x8 ft on 25 and 30 ft poles, 6x10 ft on 35–40 ft poles, and 8x12 ft or larger on 50 ft and taller commercial poles.
Do I need a permit to install a flag pole?
Most residential flag poles under 25 ft do not need a permit, though HOA covenants often set height, setback, and lighting rules. Commercial installs and poles over 30 ft usually require a permit and stamped engineering — check with your local building department before ordering.