Commercial Flag Poles for Sale20, 25, 30, 35, 40, 45, 50, 60, 70 & 80 FT — MADE IN USA

In-stock commercial flag poles include 20, 25, 30, 35, 40, 45, and 50 ft heights across Economy, Standard, and Heavy-Duty series. They ship by motor freight to a physical street address in the lower 48, usually within 2–4 weeks. Heights of 60, 70, and 80 ft are made-to-order with engineered foundations and are quoted individually.

A commercial flagpole for sale ranges from roughly $900 for a 20 ft Economy pole to $9,000+ for a 50 ft Heavy-Duty pole. The exact price depends on height, butt diameter, wall thickness, finish, and halyard type. Foundation, freight, and installation are separate unless requested as part of a delivered quote. Multi-pole orders qualify for volume pricing.

A general rule: the pole height should equal or slightly exceed the height of the nearest building eave. Small offices and storefronts typically use 20–25 ft poles. Two-story office buildings, schools, and churches usually run 30–35 ft. Big-box retail, dealerships, and corporate campuses commonly install 40–50 ft poles, with 60–80 ft reserved for civic plazas and large institutional sites.

25–35 ft is typical for small businesses. Schools and corporate campuses commonly run 40–50 ft. Auto dealerships and civic plazas often go 60–80 ft. All our commercial poles are available in 5 ft increments.

All three series use the same 6063-T6 aluminum and Made-in-USA construction. Economy uses a thinner wall (0.125") suitable for lower-wind zones. Standard (0.156"–0.188") is our most popular spec for general commercial use. Heavy-Duty (0.250"+) is engineered for coastal, high-wind, or institutional sites where the pole must survive sustained 130+ MPH gusts.

Pricing ranges from roughly $900 for a 20 ft Economy pole to $9,000+ for a 50 ft Heavy-Duty pole. Foundation, freight, and installation are additional. Volume pricing applies on multi-pole orders — submit a Commercial Bid Request for an itemized quote.

Poles 30 ft and taller usually require a crane and a poured concrete foundation with a steel ground sleeve and rebar cage sized per ASCE 7 wind loads. Smaller commercial poles (20–25 ft) can be installed similarly to residential with a heavier-duty sleeve. We can supply engineered foundation drawings on request.

Yes — for permitting we can supply manufacturer wind-load calculations and a stamped engineering letter when required by your AHJ. Additional fee applies. Request with your bid.

Yes. We offer volume pricing for cities, schools, HOAs, dealerships, and contractors. Submit a Commercial Bid Request with your specs or plans and we respond within 24–48 business hours.

Yes — every commercial aluminum flagpole we sell is manufactured in the USA using American-milled 6063-T6 aluminum and meets ASCE 7 wind-load standards. Made in USA is verified at the manufacturer level, not just assembled here.

Poles taller than 50 ft are made-to-order with engineered foundations. Use our custom quote form to specify height, finish, delivery ZIP, and commercial vs residential delivery — we return a delivered price within 1–2 business days.