Complete Setup, One Price: Flagpole + American flag + solar light bundled to save. Shop the Patriot Bundle →

    Telescoping · Made in USA

    TelescopingFlagpoles

    Shop USA-made telescoping flagpoles in 20 ft and 25 ft. No ropes, no pulleys, no tangles — heavy-gauge aluminum poles that raise, lock, and fly in seconds.

    Compare Top Picks

    Side-by-side specs to help you choose with confidence.

    Feature20 ft Titan25 ft Titan
    Sections45
    Recommended Flag3x5 ft4x6 ft
    Setup Time~30 minutes~45 minutes
    Wind Rating (no flag)Up to 95 mphUp to 90 mph
    StorageCollapses to ~6 ftCollapses to ~6 ft
    Material6063-T6 USA aluminum6063-T6 USA aluminum
    WarrantyLifetime on shaftLifetime on shaft

    Buying Tips

    What veterans and seasoned installers wish every buyer knew.

    • Telescoping poles can be retracted in severe storms — a real advantage in high-wind regions.
    • Use the included swivel rings to prevent flag wrap automatically.
    • Set the PVC ground sleeve in concrete; the pole slides in and out of the sleeve.
    • Hand-tighten lock collars only — overtightening can damage the seal.
    • Rinse with fresh water annually to keep sections sliding smoothly.
    • USA-made 6063-T6 aluminum has tighter wall-thickness tolerances than imported extrusions — that's what holds shape in 90+ mph wind.
    • Great for renters or temporary sites — easy to relocate.

    Frequently Asked Questions

    How does a telescoping flagpole work?

    A telescoping flagpole has nested aluminum sections that slide upward and lock at each joint. To raise the flag you extend each section to full height; to lower it you release the locking mechanism and collapse the sections back down. There are no ropes, pulleys, or halyards — and the flag attaches to rotating swivel rings that spin freely with the wind, so it never wraps the pole.

    Are these telescoping flagpoles made in the USA?

    Yes. Our Titan line is manufactured in the United States from American 6063-T6 aluminum and carries a Limited Lifetime warranty on the shaft. USA extrusion holds tighter wall-thickness tolerances than imported aluminum, which is the single biggest factor in how the pole performs under wind load.

    Do telescoping flagpoles tangle?

    No. The flag rotates freely on swivel rings, so it always reorients with the wind instead of wrapping around the pole. That's the core advantage over rope-and-pulley designs, where the halyard slaps the pole and the flag wraps in gusts.

    Are telescoping poles as strong as one-piece poles?

    For residential use, yes. Modern telescoping poles use heavy-gauge aluminum and rated lock collars handling sustained winds up to 95 mph. They also have a unique advantage: in a hurricane or named storm you can collapse the pole in 60 seconds and lay it on the ground — something a one-piece in-ground pole can't do.

    How is a telescoping flagpole installed?

    Dig a hole roughly 24 inches deep, set the included PVC ground sleeve in concrete, plumb it, let the concrete cure for 24 hours, then slide the pole into the sleeve and extend it. No contractor, no welding, no special tools. The pole itself never touches concrete — it slides in and out of the sleeve for storms or storage.

    How long do telescoping flagpoles last?

    High-quality USA-made telescoping flagpoles last 15–25 years or more with normal care. Anodized or powder-coated finishes plus stainless hardware are what get you to the long end of that range — that's the spec our Titan line ships with.

    Can I leave the flag up at night?

    Yes — add solar lighting to comply with US Flag Code for 24/7 display. Most installers add a solar light at the base of the pole pointed at the flag.

    How much does a 25 ft telescoping flagpole cost?

    Our 25 ft Titan telescoping flagpole kits run in the mid-hundreds with free standard shipping. Pricing varies by finish and flag options — check each product page for current price.

    Ready to Raise the Flag?

    Free shipping on flagpoles. Talk to a real person if you need help picking.