50' Standard Aluminum Commercial Flagpole
5-Yr Shaft Warranty
Backed by manufacturer
Free Freight
Avg transit 1–2 weeks
30-Day Returns
Hassle-free policy
Made in USA
American materials
American Flag — Nylon
Lightweight, vivid colors, best for moderate wind areas
$319.99
American Flag — Polyester
Heavy-duty, built for high wind and harsh weather
$338.99
Extra Set of Clips to Fly 2nd Flag
Fly a second flag below your main flag
$18.00
EXPRESS
50 ft commercial flagpole with an 8" butt and 0.188" wall, made in the USA from 6063-T6 aluminum and shipped as a three-piece shaft for freight-friendly delivery. Wind-rated to 115 MPH without flag, it's the standard 50-footer for car dealerships, civic plazas, large schools, and corporate headquarters that want a 10' x 15' flag flying overhead. Complete kit ships with a gold or silver ball ornament, revolving truck, halyard, vinyl-covered flag snaps, cleat, flash collar, and steel ground sleeve. Recommended flag: 10' x 15'. Available in Satin, Clear Anodized, Bronze Anodized, and Black Anodized finishes.
Specifying a 50 ft Standard Commercial Aluminum Flagpole
A 50 ft pole flies a 10×15 ft flag — the largest flag in regular commercial use and the size you see at car dealerships, civic plazas, corporate campuses, and large school districts. Our 50 ft standard commercial flagpole is built from 6063-T6 architectural aluminum with an 8-inch butt diameter and a 0.188-inch wall thickness, manufacturer-rated to 115 MPH unflagged. It ships as a three-piece shaft for freight-friendly delivery, with internal splices engineered to match the strength of a single extrusion. The full kit includes a gold or silver ball ornament, single-pulley revolving truck, halyard, vinyl-covered flag snaps, gold-anodized cleat, flash collar, and steel ground sleeve.
Stamped engineering letters for permit submission are available within 5–10 business days for an additional fee on commercial-address orders — every 50 ft install we are aware of requires them. Lead time is 3–4 weeks; freight delivery to a commercial dock is included. Plan for lift-gate service and a real installation crew with a boom truck or small crane — this is not a DIY install.
Ideal Use Cases
- •Auto dealerships, RV dealers, and powersports lots flying a 10×15 ft flag
- •Civic plazas, county courthouses, and city halls
- •Large schools, high schools, and university quads
- •Corporate headquarters and signature office campuses
- •Memorial parks and veterans memorials
- •Hotels, casinos, and resorts wanting a hero-size flag at the entrance
Installation: What to Expect
A 50 ft pole requires a boom truck or small crane to raise — there is no 2-person manual lift option. Plan for a 3-person crew plus equipment, and budget the better part of a day on-site after the footing has cured.
- Excavate a 72" deep × 30" diameter footing below the frost line
- Place 6" of #57 crushed gravel for drainage, then set a 30" sonotube form
- Center the steel ground sleeve, plumb on two axes, and brace before pouring
- Pour 30–40 bags of high-strength concrete in 12" lifts; crown the top to shed water
- Cure 7 days minimum (10 days for full design strength) before raising the pole
- Splice the three shaft sections on the ground, then raise with a boom truck or crane
- Lower into the sleeve, plumb true, pack clean dry sand around the pole inside the sleeve, then install the truck, cleat, halyard, and ball
For Central Ohio installs we handle this turnkey. Elsewhere, hire a flagpole installer or sign contractor — do not subcontract a 50 ft flagpole install to a general landscape crew.
50 ft Standard vs. 50 ft Extra Tall Heavy Duty
| Feature | Nylon | 50 ft Extra Tall Heavy Duty |
|---|---|---|
| Butt diameter | 8" | 10" |
| Wall thickness | 0.188" | 0.188" |
| Wind rating (unflagged) | 115 MPH | 168 MPH |
| Recommended flag | 10×15 ft | 10×15 ft |
| Best for | Inland Exposure B/C civic and commercial sites | Coastal, Exposure D, landmark installs |
| Price point | Lower | ~11% higher |
Frequently Asked Questions
Do I need a permit for a 50 ft flagpole?
Almost always yes. Nearly every jurisdiction requires a building permit and stamped engineering drawings for a flagpole over 35 ft on commercial property. Stamped engineering letters are available within 5–10 business days for an additional fee — specify your AHJ and ASCE 7 exposure category when ordering.
What size flag should I fly on a 50 ft pole?
A 10×15 ft U.S. flag is the manufacturer-recommended size and the textbook 1:5 height-to-flag ratio. An 8×12 ft flag is acceptable if you want a smaller visual footprint; flying anything larger than 10×15 ft exceeds the design envelope and voids the engineering certification.
When should I upgrade to the 50 ft Extra Tall Heavy Duty (10" butt)?
Upgrade for any coastal site, any ASCE 7 Exposure Category D site, any 24/7 illuminated display, or any installation where the pole is the architectural focal point of the property. The 10" butt steps the unflagged wind rating from 115 MPH to 168 MPH and changes the failure mode in extreme wind events.
How is the pole delivered?
The 50 ft pole ships as a three-piece shaft via LTL freight to a commercial dock. Lift-gate service is available at checkout for sites without a forklift. The three sections are spliced together on the ground during install using engineered internal splices that match the strength of a single extrusion.
What is the lead time?
Typical lead time is 3–4 weeks from order to delivery. Satin and clear-anodized finishes ship fastest; bronze and black anodized add 1–2 weeks. Stamped engineering letters are produced in parallel and arrive within 5–10 business days of order.
Who This Flagpole Is For
Not sure if this is the right pole for you? Here's who it's built for.
Businesses & Municipalities
Office parks, government buildings, schools, dealerships, and HOAs that need a long-lasting, professional display.
Estate Homes & Large Properties
Homeowners who want a heavier, taller pole — typically 25 ft or larger — that stands out and lasts decades.
Installers & Contractors
Pros installing for clients who need reliable lead times, predictable specs, and a 5-year shaft warranty.
This Pole's Specs
Manufacturer-tested wind rating and recommended flag size for this exact model. Sizing your flag correctly keeps the pole within its rated wind speed. See the full sizing guide →
Wind rating reflects manufacturer-tested performance for the flagpole without a flag installed. Flying a flag — especially one larger than recommended — reduces the effective wind rating.
How Installation Works
Commercial-grade flagpoles are a more involved install than residential. The pole has to be carefully plumbed and the ground sleeve packed with sand for proper load handling. We recommend professional installation; in Central Ohio we install them ourselves.
It Arrives Ready to Install
In-stock flagpoles ship to 48 states. You receive the pole, ground sleeve, hardware, and instructions.
Set the Ground Sleeve
Dig the foundation per the included spec, set the steel ground sleeve, plumb it true, and pour concrete around it. Let the concrete cure 24–48 hours before installing the pole.
Set the Pole, Pack & Fly
Lower the pole into the cured sleeve and plumb it true. Pack clean, dry sand around the pole inside the sleeve to lock it in and absorb wind load. Attach your halyard and flag and raise it. A 25 ft+ commercial pole typically needs 2–3 people or a small lift.
Local Installation Available in Central Ohio
We professionally install flagpoles in Columbus, Lancaster, Pickerington, Canal Winchester, and surrounding suburbs — backed by 25 years and hundreds of installs.
Store Rating
Based on 7 verified store reviews across all products
This product hasn't been reviewed yet — we'll email you a review request after your order arrives.
