Titan Telescoping Flagpoles15, 20 & 25 ft — Made in USA

The Titan is our American-made telescoping flagpole line, built from 6063-T6 aluminum in 15, 20, and 25 ft heights. Nested sections slide up and lock at each joint — there are no ropes, pulleys, or halyards — and the flag flies on anti-wrap swivel rings. Every Titan kit ships with a USA-made flag, PVC ground sleeve, ball ornament, and hardware.

Yes. Titan poles are manufactured in the United States from American 6063-T6 aluminum and carry a Limited Lifetime warranty on the shaft.

Titan telescoping flagpole kits run in the mid-hundreds depending on height and options, with free shipping to the lower 48. Check each product page for current pricing.

The 20 ft Titan ships with a 3x5 ft USA-made American flag and the 25 ft Titan ships with a 4x6 ft flag. The 15 ft Titan flies a 2.5x4 ft or 3x5 ft flag.

No. The flag mounts to swivel rings that rotate freely with the wind, so it reorients instead of wrapping the pole. There is no halyard to slap or replace.

Dig a hole roughly 24 inches deep, set the included PVC ground sleeve in concrete, plumb it, cure 24 hours, then slide the pole into the sleeve and extend it. Most homeowners finish the install in an afternoon with no contractor.

Titan poles are rated up to 95 mph without a flag (90 mph on the 25 ft). In severe weather you can collapse the pole in about a minute and lay it down.

Yes. A solar flagpole light mounts at the base and lets you fly the flag around the clock per US Flag Code. See our telescoping flagpole with solar light guide for mounting and brightness recommendations.